INVERBOOST Commercial Pool Heat Pump

INVERBOOST Commercial Pool Heat Pump

INVERBOOST Commercial Pool Heat Pumps use the advantages of modern air-to-water heat pump technology, resulting in high-efficiency heating and cooling systems, quite easily.

Complete with variable speed inverter-driven compressors and our high-efficiency condenser, the INVERBOOST commercial pool heat pump is the perfect solution for any commercial job – even in extreme climates.

Energy-efficient, Higher C.O.P

INVERBOOST commercial pool heat pump is designed to compensate for higher investment costs by very low operational costs compared to electric & gas heaters.

Centralized Control 

INVERBOOST Commercial Pool Heat Pump is in modular design, 4 units can be set as one module and controlled flexibly, reaching max. 480 kW heating capacity.

Dual independent compressor systems allow individual operation relevant to the system demand. This makes temperature adjustment and failure review much easier and more practical. By incorporating the master-slave control into the design, the units in the whole system can work together with higher efficiency without being interfered with by any failure of the slave units during operation.

Intelligent Operation with 3 Modes

• Smart mode: Heat your pool at 20%-100% capacity dynamically
• Silent mode:  After desired temperatures are reached, silent mode helps to save energy and running costs by using a 25% capacity
• Turbo mode:  Achieve the best heating capacity for your pool

Distance of  Installation

Generally, the pool heat pump unit should be installed beside the swimming pool, and the distance should be less than 7.5 meters.

The installation distance of each pool heat pump unit is shown on the right.