Pool Heat Pumps With A Variable-Speed Compressor Or Called Inverter Compressor Have Refrigerant Cycles That Run At Different Speeds Depending On Different Temperature And Heating Loads.
By automatically adjusting the speed of the pumped refrigerant, the inverter reduces energy losses caused by stopping and starting. Compared to old technology heat pumps like driving your car at either full throttle or engine off, we know that this is a very inefficient way to drive. Now drive your car at a throttle setting that is in keeping with the best mpg – that’s why an inverter pool heater is an incredibly high efficiency, up to 120% efficient. Compared to an old technology unit with only 50% efficiency, what to choose for your swimming pool is clear now.
Regular pool heat pump compressors work at a constant, fixed speed until the pool reaches the required temperature, then switch off. When the temperature needs to be raised again, the compressor switch back on. Inverter compressors work constantly, at varying speeds, without so many starts and stops.
That means less wear-and-tear on components and huge savings on energy costs. Inverter technology has been on the market for over 10 years now, but for pool heating, recently Zealux has developed INVERBOOST UX, a technology leader that has designed a full range of inverter pumps that far pass the other competitors, our INVERBOOST UX is with unique curves design, three efficiently modes for running, turbo/smart/silent and follow the personal needs, built-in wifi, you can control your pool pump any place and any time.
Inverter Heat Pump Pool Heater
Inverter technology is a new way to warm your pool. The pool heater market is moving from on-off pool pumps to inverter-driven pumps. Inverter brings air source pumps are more efficient and have a number of benefits, Inverter driven heat pumps speed up quickly and slow down the motor compressor to adjust energy demand and use less energy because they follow pool heating requirements more tightly, they don’t use a lot of energy to restart all the time in the whole day, they put less strain on the electrical supply making them better for single-phase supply and save much electricity cost.
When compared to traditional fossil fuel-burning heating systems, both fixed output and inverter heat pumps offer far greater levels of energy efficiency.
A well-designed heat pump system will provide a coefficient of performance (CoP) between 3 and 5 (depending on whether ASHP or GSHP). For every 1kW of electrical energy used to power the heat pump, it will return 3-5kW of heat energy. Whereas a natural gas boiler will provide an average efficiency of around 90 – 95%. The heat pump will provide approximately 300%+ greater efficiency than burning fossil fuels for heat.
To get the maximum efficiency from a heater, homeowners are advised to leave the heater running continuously in the background. Leaving the heat pump switched on will keep a steady continuous temperature in the property, reducing the ‘peak’ heating demand, and this most suits inverter units.
An inverter heat pump will continuously modulate its output in the background to provide a consistent temperature. It reacts to changes in heat demand to make sure the fluctuation in temperature is kept to a minimum. Whereas a fixed output heat pump will continuously cycle between maximum capacity and zero, finding the right balance to supply the temperature needed by cycling more often
Inverter technology makes heat pumps can be ‘tuned’ to suit the climate in which they are operating, as they maintain a far more stable set-point they don’t need such a big buffer to keep the temperature of a pool, saving on electricity consumption. coz its low-speed operation, the noise level of the heater is very low. The choice of fans also contributes to this noise reduction.
This is a significant advantage in small spaces where the heat pump is placed close to the pool, or where it does not disturb our neighborhood, pool heat pumps with inverter technology use R32 refrigerant, In addition to inverter technology, the use of R32 refrigerant, which is more efficient and environmentally friendly than the tradition on/off units used R410A.
Come to choose one INVERBOOST UX pool heat pump, it will bring warm and sweet swimming time to your family.